1) Standby - four fingers hold the stand, with the right-hand thumb naturally on the fuselage cover, holding the machine smoothly.

2) Put cloth - lift the clamp using the right index finger, put already for sewing fabric formation in linking piece, and gently back platen pressure fabric.

3) The sewing operation - a fabric with his left hand, and right-hand thumb gently underground pressure quickly, and automatic feed institutions will be sewn to the left.

4) Change the thread - such as in a big thread, to a spare extension rod and wire tube shaft connection, set into the big thread. And threading, again after adjusting the line elastic sewing.

5) Change the needle - loosen the screw, and remove the broken needle with the new pin. Package comes with a very detailed instruction which with picture and text, which is convenient for you to learn operation methods.

1. Please put in 4 AA new batteries at correct place and make sure positive and negative poles correspond to each other.

(Note: If you put the batteries at wrong place, the machine will not work.)

2. Put the cloth under the fastening plate there, press the button start for sewing.

(Note: Make sure the safety lock is unlock before every time use, and the cloth can not over 1.8mm, if not, machine will not work. For safety, remember to lock the safety lock after use)

3. After sewing, you have to tie a knot, because it is a single thread sewing machine.

(Note: When you remove the machine, the thread goes to the back, please remember that it must be knotted. If not the thread will come unsewn.)

4. If you can't sew and skip threads, What to do ?

There is a screw on the front of the needle, loosen it first, put the needle to the most insides, if it still doesn't work, put the needle down a little more.

(Note: The head of the sewing machine must be facing the directly in front, if not, machine will also can not work. Hold the head of the sewing machine with pliers and fine-tune it to the right.)

Product description